Epoxy flooring Melbourne FL offers excellent solutions to keeping polished floors. You usually rely on an acidic and citrus solution like vinegar or lime to remove stubborn dirt and stains from the floors. But with epoxy, you will no longer have to deal with harsh cleaning chemicals.
One of the maintenance challenges in using epoxy is leaving whitish stains or streaks of haze on the surface. The cleaning material used contains acidic compounds, which is a big NO. Since epoxy has an enhanced polished surface, using harsh and heavy tools and cleaners is not necessary.
Today’s guide will show you the knit and grit of epoxy flooring maintenance. The basics, the do’s and don’t; all of these ahead!
Why Epoxy Flooring Needs Maintenance?
Epoxy floors boast their high functioning floor features. The floor would be easy to clean and resistant to stains and moisture, cracks, and abrasions. In addition, epoxy leaves the surface sealed, thus making it zero bacteria at all times.
So, does the epoxy floor still needs maintenance? YES
Heavily soiled epoxy floors
Epoxy floors are installed among high foot traffic areas. Of course, all sorts of dirt from outdoors and other stains like food and drink spills would touch the floors. Of course, you need to clean them, especially if you get heavily soiled epoxy floors. However, instead of suffering from a heavy cleaning chemical smell and consuming time from polishing the flooring surface, you only need to give it a gentle cleaning. A fast and convenient one. Minimizing all your hassle.
Cleaning epoxy floors saves you from all expensive repairs. That said, specific methods apply to cleaning the finished epoxy flooring. All you need is to learn the basics, and you are good to go.
If you have just owned an epoxy floor, you will need to give the surface a quick retouch and have a necessary cleaning routine on the floors after some time. Here are what you need to do.
Avoid soapy cleaners
You need to avoid strong detergent soap. Failure to do so, epoxy’s surface will turn whitish. This looks like hazy streaks of clouds staining the epoxy and losing its shine. That is a sign of damage, and you cannot reverse it to how the epoxy looks shiny as before.
You will need to refinish or reapply an epoxy coating. However, that will require you to have the entire flooring space resealed to make it look continuous. What does it mean?
If you only reseal a particular spot, it may result in an uneven look, where one place looks new and bright while the rest would look a little outdated. You can still apply an epoxy coating where needed, but make sure that the rest will coincide with its newly polished look.
Now, if you opt for a spot cleaning epoxy floors, then here’s what you exactly need to do:
- Prepare materials: ammonia, a gallon of water, a soft bristle sponge, gloves, protective cleaning gear, kettle for heating the water.
- Prepare the ammonia with a hot water mixture.
- Heat the gallon of water, and mix in 4 to 5 ounces of ammonia.
- If you need more, follow the ratio of 4 to 5 ounces of ammonia in every gallon of warm water.
This solution will be enough to lift every stain on the epoxy floors without leaving a trace of the mess. Also, it won’t leave the hazy streaks that are a worse stain on epoxy floors.